渣漿泵機械密封的特點

渣漿泵機械密封的特點
    優點:機械密封設有由彈性元件、鋪助密封圓等構成的軸向磨損補償機構，因此其泄漏量極??；壽命長，一般為1~2年:對抽的摩擦小；可自動運行而不需在運行時調正；功率損失小，只有填料密封的1/3-1/10,耐振動性好；使用廣泛；目前轉速可達17000r/min，壓力達到30MPa。
    缺點:零件多，精度高，相應造價高；由于動密封面垂直于旋轉軸線，所以安裝時的對中非常重要。

Characteristics of mechanical seal for slurry pump

Advantages: the mechanical seal is equipped with an axial wear compensation mechanism composed of elastic elements, auxiliary seal circles, etc., so its leakage is very small; its service life is long, generally 1-2 years; the friction of the opposite pump is small; it can operate automatically without adjusting during operation; the power loss is small, only 1 / 3-1 / 10 of the packing seal, with good vibration resistance; it is widely used; at present, the rotating speed can reach 17000r / min, and the pressure can reach 30MPa.

Disadvantages: there are many parts, high precision and high cost; since the dynamic sealing surface is perpendicular to the rotating axis, the centering during installation is very important.